Settings
8.6 Information and maintenance programs
Info
Technical information about various device components is displayed under this
menu item.
No settings can be applied.
Note:
Maintenance programs The S01 and S02 maintenance programs simulate long-term operation and logs the
correct condition of the device.
Any faults are diagnosed and recorded.
SO1
This program simulates two 15-minute treatment sessions and one defrosting
process. The program records key parameters such as temperature and duration.
The current temperatures of the compressor and evaporator can be checked during
the test.
SO2
The device cools down to - 43°C / - 38°C and starts a 15-minute treatment session
at fan level 9.
This program is repeated until the start/stop key is pressed.
8
Page 20