Page 1
Mounting of the Holder Arm for Treatment Tube After assembly, the device should appear as indicated in Figure 1 below. Articulated joint Grommet Support bracket Figure 1...
Page 2
Assembly Instructions: 1. Necessary parts: Figure 2 1 Support bracket 2 Rod 3 Hose holder 4 Articulated joint 5 Hook 6 2 screws M5x25 and an allen key 2. Before starting, please assemble the glass plate onto the Cryo V6.0 as indicated in the User Manual Cryo V6.0 (Chapter 2 “Assembly Instructions”) 3.
Page 3
4. Next, use the allen key and screw the support bracket to the bottom of the Cryo V6.0 (threads are already inserted into the device bottom). Threads Figure 4 5. Now, push the rod through the hole in the glass plate ( ) and snap it into the snap-on Figure 5 connection on the support bracket (Figure 6).
Page 4
6. Screw the articulated joint onto the rod. 7. Then screw the hose holder onto the articulated joint. 8. Hang the hook onto the articulated joint. Figure 7...
Need help?
Do you have a question about the Cryo 6 and is the answer not in the manual?
Questions and answers