Table of Contents
Advertisement
Device set-up
7.2 Fitting the supporting arm
Step 4 - attaching the supporting arm
Screw the supporting arm (a) onto the fitted pole. The recesses must be aligned in
order to ensure that the supporting arm can move freely up and down. They must lie
along an axis and allow the pole to bend.
- Recesses below
- Same bend orientation
Step 5 - attaching the tube clip / tube holder
Screw the tube clip (b) onto the rotating supporting arm, and hang the tube holder (c)
onto the fixing screw of the supporting arm.
The treatment tube can now be passed through the tube securing element and the
handpiece can be engaged in the tube clip.
7
Page 14
Hide quick links:
Advertisement
Table of Contents
