Device Type And Device Configuration - Zimmer Cryo 6 Instructions For Use Manual

Settings

8.2 Device type and device configuration

Device type Cryo 6 can be used as "Cryo 6 Physio" or "Cryo 6 Derma".
Use the arrows (14 and 15) to navigate to the pre-set configuration that you want to
use. Then press the "Save" key to select it.
See chapter 9.3 for more information about device types and specific parameters.
Device configuration This menu item offers various settings, such as languages or aspects of the start-up
process.
Use the arrows (14 and 15) to navigate through the sub-menu.
Press the "Select" key (17) to select an item.
Languages
The following languages are available:
German, English, French, Italian and Polish.
The "External control input", "External control output" and "External start input" sub-
Note:
menus are inactive.
Start-up process
Cryo 6 offers two different options here:
Press the "Select" key to select the menu.
Press the "Change" key to switch between direct start and programs.
Press the "Save" key to save the start-up process you want to run and the "Yes" key
to confirm and apply your choice.
1. Direct start
2. Programs
8
Page 16