Table of Contents
Advertisement
Functional test
Functional test
After being switched on, Cryo 6 automatically performs a self-test and checks the
function of the technical components.
If necessary, the user can check the function of the cooling technology as described
below:
1. Switch on the device.
2. Wait until the device is ready for use.
This is the case when the device displays the program selection menu /
direct start menu.
3. Press the start/stop key (18) to start up Cryo 6.
4. Select the various airflow levels one after the other and check the strength
of the air stream and the cold air output.
16
Page 33
Hide quick links:
Advertisement
Table of Contents
