Table of Contents
Advertisement
Operation instructions
9.1 Device description
Pre-cooling
As soon as Cryo 6 is switched on, the device starts to pre-cool to the minimum
temperature to be reached. The compressor and condenser fan work together during
this phase. At the same time the device performs a self-test. No data can be entered
via the display during the self-test or pre-cooling. The only active key is the "Menu" key
(1), which users can press to reach the configuration menu. When sufficient pre-
cooling has been carried out, the display automatically switches to the start screen.
Cryo 6 is now ready for use.
Operation
During treatment, the treatment fan blows cold air through the treatment tube. At the
same time, the compressor / condenser starts up automatically during treatment in
order to ensure constant cooling.
Standby mode
Cryo 6 is in standby mode when no treatment is being carried out. The compressor
automatically starts up as soon as a certain temperature is exceeded, in order to
ensure that sufficient cold air is available at all times. Treatment can be started
immediately from standby mode.
Recommendation for
We recommend that about 10 minutes should be left between the end of pre-cooling
optimum
and the start of treatment. This ensures that the device has reached peak cold air
treatment
output.
We also recommend that Cryo 6 is only switched off when there are prolonged breaks
in treatment or at the end of the day.
9
1
Page 21
Hide quick links:
Advertisement
Table of Contents
