Defrosting - Zimmer Cryo 6 Instructions For Use Manual

Settings

8.4 Defrosting

Defrost The "Defrost" menu item triggers defrosting of the heat exchanger.
Note: Perform defrosting when the outgoing air stream is less strong than usual. This is
often caused by the Cryo 6 being placed in a humid environment such as a bathing
area or sauna. We also recommend defrosting the Cryo 6 and emptying the defrost
water container if it has not been used for a prolonged period, for instance during
holidays.
Performing defrosting Press the "Select" key to immediately begin the defrosting process. The defrosting
process is carried out in standby mode.
The treatment fan starts up and runs until the cooling unit's defrosting temperature
has been reached. The blower then switches off.
The message "Defrost complete" appears on the display once the defrosting process
has been completed.
Press the "Back" key if you want to interrupt the defrosting process before it has
finished.
8
Page 18