Visonic PowerMaster-33 G2 Installer's Manual page 5

Device Locator
Guard key-safe
Arming key
D-306917
PowerMaster-33 G2 Installer's Guide
Helps you to easily identify the actual device
displayed on the KP-250 PG2 LCD display.
The PowerMaster-33 is able to control a safe
that holds site keys that are accessible only
to the site's guard or Monitoring Station's
guard in the event of an alarm.
External system can control arming and
disarming of the PowerMaster-33 system
To read more on the Device Locator: see
KP-250 PG2 User's Guide, Chapter 3,
Arming and Disarming the System
To use the device locator when bypassing
a zone or when clearing a bypassed zone:
see KP-250 PG2 User's Guide, Chapter 6,
section B.1 Setting the Zone Bypass Scheme
To use the device locator when conducting
the periodic test: see KP-250 PG2 Installer's
Guide, Chapter 4 Periodic Test by Installer
Code or KP-250 PG2 User's Guide, Chapter 8
Periodic Test by User Code.
1. Connect the safe to the panel: see
section 3.8 Optional Expander Module
Mounting, Figure 3.8b
2. Configure the safe's zone type to
"Guard Zone": see KP-250 PG2 Installer's
Guide, section 3.4.2 Adding New Wireless
Devices or Wired Sensors
3. Setup guard code: see KP-250 PG2
Installer's Guide, section 3.3 Setting Installer
Codes
Connect the external system output to the
panel: see section 3.8 Optional Expander
Module Mounting, Figure 3.8b
5