Exp-33 Expander Module Installation - Visonic PowerMaster-33 G2 Installer's Manual

3.8.1 EXP-33 Expander Module Installation

The Expander Module EXP-33 is an optional module.
Review Figure 3.1.1 and identify symbol I.
To mount the Expander module as shown in Figure 3.8a, complete the following steps:
1. Press downward on the Expander module between the two clips to insert the module into the back panel. See
Figure 3.7a EXP-33 Expander Module (A) to identify the clips.
2. Connect the EXP-33 Expander Module by the flat cable to the front panel Expander slot "EXPANDER".
Figure 3.7a – EXP-33 Expander Module
D-306917 15
PowerMaster-33 G2 Installer's Guide