Battery Insertion; Connect Ac Power To The Unit - Visonic PowerMaster-33 G2 Installer's Manual

Connect the power adaptor to the front panel power connector.

3.9.1 Battery Insertion

Open battery compartment cover.
Insert one 6-battery pack or 8-battery
pack and connect its connector as
shown in Figure 3.8c.
A. Front panel
B. Battery cable
C. Battery cable connector
D. Slot for battery cable

3.9.2 Connect AC Power to the Unit

Connect power to the PowerMaster-33 G2 to mains power outlet (see Figures 3.9a and 3.9b).
Disregard any "trouble" indications pertaining to lack of battery or lack of telephone line connection.
For Europe Safety Compliance:
a. The model shall be installed according to the local electrical code.
b. The circuit breaker shall be readily accessible.
c. The rating of the external circuit breaker shall be 16A or less.
D-306917
PowerMaster-33 G2 Installer's Guide
EXTERNAL POWER CONNECTION
Figure 3.9b – External Power Connection
Figure 3.9c – Battery Insertion
19