Closing The Powermaster-33 G2 Control Panel - Visonic PowerMaster-33 G2 Installer's Manual

3.10 Closing the PowerMaster-33 G2 Control Panel

Control panel final closure is shown below.
To Close the Control Panel:
1. Connect the flat cables, between the front and back panel, with the
respective connectors. You can have a maximum of 3 connections,
depending on the configuration options.
2. Make sure that the "Power" indicator on the control panel lights
green.
3. Close the panel and fasten the 2 screws.
20
Figure 3. 10 - Final Closure
D-306917
PowerMaster-33 G2 Installer's Guide