Closing The Powermaster-33 G2 Control Panel - Visonic PMASTER20G2 Installer's Manual

3.10 Closing the PowerMaster-33 G2 Control Panel

Control panel final closure is shown below.
To Close the Control Panel:
1. Connect the flat cables, between front and back units, in their
respective connectors (up to 3, according to options).
2. Make sure that the "Power" indicator on the control panel lights
green.
3. Close the panel and fasten the 2 screws.
18
Figure 3.
10 - Final Closure
D-304267
PowerMaster-33 G2 Installer's Guide