General Description; Specifications; Features - Sargent H1 Installation Instructions Manual

2

General Description

The SARGENT Harmony Series H1 Mortise Lock is designed to interface with an existing weigand access
control system.
3

Specifications

• Latch - Stainless steel 3⁄4" projection one-piece
• Deadbolt - One-piece hardened stainless steel
• Guardbolt - Stainless steel, non-handed
• Handed - Easily field reversible without
opening case
• Case - 12 gauge heavy duty wrought steel
4

Features

• Complete monitoring of door from locks
• Wires directly to Access Control System
• 12 or 24 VDC Fail Safe/Fail Secure
For installation assistance, contact SARGENT at 800-810-WIRE (9473)
• Outside lever controlled by any prox credentials
• Inside lever provides REX signal and retracts latch
and deadbolt
• Locks furnished for 1-3/4" doors. Can be
furnished for other door sizes upon request.
Consult factory
• U.L. Listed (3 hr.)
• HID 125khz proximity credentials
• All HID Bit formats
Wiegand
Access Control
System
(By Others)
Power
12VDC or 24VDC
Harmony Series
H1
A7877A
Harmony Series H1 Mortise Lock
© SARGENT Manufacturing Company 2007
1