Sargent H1 Installation Instructions Manual page 11

Profile Series H1 Mortise Lock
Step #7 – Installation of Inside Escutcheon Assembly
1. Attach E-Lynx door harness connectors to inside electronic.
2. Feed wires into door pre.
3. Attach inside escutcheon to mounting plate.
Note: Be sure not to pinch wires when mounting escutcheon.
OUTSIDE OF
DOOR
© SARGENT Manufacturing Company 2007
8
A7877A
For installation assistance, contact SARGENT at 800-810-WIRE (9473)
E-Lynx Harness
Gasket Inside Harmony - Mortise
INSIDE OF
DOOR
Escutcheon Screw
8-32 x 5/8"
long Phillips
Flat Head
Escutcheon Screw
8-32 x 1/4"
long Phillips
Flat Head