Table of Contents
Advertisement
Option
Description
F1/F2 Prompt on
Enables or disables the F1/F2 prompt on error. This option is set to Enabled by default. The F1/F2 prompt also
Error
includes keyboard errors.
Load Legacy Video
N/A
Option ROM
Dell Wyse P25/P45
Enables or disables the Dell Wyse P25/P45 BIOS Access. This option is set to Enabled by default.
BIOS Access
Power Cycle
Enables or disables the Power Cycle Request. This option is set to None by default.
Request
Identifier
Status
iDRAC Settings utility
The iDRAC settings utility is an interface to set up and configure the iDRAC parameters by using UEFI. You can enable or disable various
iDRAC parameters by using the iDRAC settings utility available with iDRAC Enterprise License..
NOTE:
The Dell EMC Storage NX3240 system does not support UEFI mode.
For more information about using iDRAC, see Integrated Dell Remote Access Controller User's Guide at Dell.com/idracmanuals.
Identifier
Status
Device Settings
Device Settings enables you to configure device parameters.
Identifier
Status
Dell Lifecycle Controller
Dell Lifecycle Controller (LC) provides advanced embedded systems management capabilities including system deployment, configuration,
update, maintenance, and diagnosis. LC is delivered as part of the iDRAC out-of-band solution.
Identifier
Status
Embedded systems management
The Dell Lifecycle Controller provides advanced embedded systems management throughout the lifecycle of the system. The Dell Lifecycle
Controller can be started during the boot sequence and can function independently of the operating system.
NOTE:
Certain platform configurations may not support the full set of features provided by the Dell Lifecycle Controller.
60
Pre-operating system management applications
GUID-8BAA92E6-75A6-4106-9EFB-F82EB229B366
Released
GUID-498E6750-5781-4D13-BEED-2FC736944906
Released
GUID-7B817AD4-3AA4-41E8-A199-A85EF2056D00
Released
GUID-19B8CFAC-81B8-4022-936A-73C1FC438DAE
Released
Hide quick links:
Advertisement
Table of Contents
