Installing The Expansion Card Riser 1 - Dell EMC NX3240 Installation And Service Manual

Figure 72. Removing the expansion card riser 1
Next step
Install the expansion card riser
Identifier
Status

Installing the expansion card riser 1

Prerequisite
Follow the safety guidelines listed in
Steps
1 Align the guide rails on the riser with the standoffs on the side of the system.
2 Lower the riser into the system until the riser connector engages with the connector on the system board.
124 Installing and removing system components
1.
GUID-9467CFB2-CA5B-4C72-BAD5-890FED05C731
Released
Safety instructions.