Network Daughter Card; Removing The Network Daughter Card - Dell EMC NX3240 Installation And Service Manual

Figure 75. Installing the expansion card riser 2
Next steps
1 Install the air shroud.
2 If removed, install the
3 If applicable, open the PCIe card holder latch on the air shroud to install the full length card.
4 Follow the procedure listed in
5 Install any device drivers required for the card as described in the documentation for the card.
Identifier
Status

Network daughter card

The network daughter card (NDC) is a small, removable mezzanine card, which provides the flexibility of selecting different network
connectivity options.
This section contains information about the removal and installation of the network daughter card.
Identifier
Status

Removing the network daughter card

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
3 Remove the expansion card riser 2
expansion cards into the riser.
After working inside your
GUID-924E9B67-3E96-44F4-8181-9FDD5E3A7128
Released
GUID-D0206B70-CA05-4F2A-B783-A06F3FB298AF
Released
Safety instructions.
Before working inside your
or the rear drive
system.
system.
cage, depending on the configuration of your system.
Installing and removing system components 127