Removing A Power Supply Unit; Installing A Power Supply Unit - Dell EMC NX3240 Installation And Service Manual

Identifier
Status

Removing a power supply unit

Prerequisites
CAUTION: The system needs one power supply unit (PSU) for normal operation. On power-redundant systems, remove and
replace only one PSU at a time in a system that is powered on.
1 Follow the safety guidelines listed in
2 Disconnect the power cable from the power source and from the PSU you intend to remove, and then remove the cable from the
strap on the PSU handle.
3 Unlatch and lift the optional cable management arm if it interferes with the PSU removal.
For information about the cable management arm, see the system's rack documentation at Dell.com/storagemanuals.
Step
Press the orange release latch and slide the PSU out of the system by using the PSU handle.
Figure 100. Removing a power supply unit
Next step
Install the PSU or the PSU blank.
Identifier
Status

Installing a power supply unit

Prerequisites
1 Follow the safety guidelines listed in
GUID-AF909CE8-379C-4B95-BD5E-88AAC42F890F
Released
Safety instructions.
GUID-C683AE2B-AF8A-42EB-9673-002A20102FA4
Released
Safety instructions.
Installing and removing system components 147