Installing The Front Bezel - Dell EMC NX3240 Installation And Service Manual

Steps
1 Unlock the bezel by using the bezel key.
2 Press the release button, and pull the left end of the bezel.
3 Unhook the right end, and remove the bezel.
Figure 14. Removing the front bezel with the LCD panel
NOTE: The images shown here are for representation only and the actual configuration of your system may vary.
Identifier
Status

Installing the front bezel

Prerequisite
Follow the safety guidelines listed in
Steps
1 Locate and remove the bezel key.
NOTE: The bezel key is part of the LCD bezel package.
2 Align and insert the right end of the bezel onto the system.
3 Press the release button and fit the left end of the bezel onto the system.
4 Lock the bezel by using the key.
GUID-7656DCD3-7A3E-4F14-A9CF-A80ECDF69992
Released
Safety instructions.
Installing and removing system components 65