Unpacking the SSA
Unpacking the SSA
Unpack the SSA as follows:
1.
Open the box and remove the packing material protecting the SSA.
Save the shipping box and materials in the event the unit must be reshipped.
2.
Remove and set aside the rail kit, RJ45‐to‐DB9 converter, anti‐static wrist strap, and adhesive
feet (for desk‐top placement).
The SSA does not include screws for attaching the rails or the SSA to rack posts.
3.
Verify the contents of the carton as listed in the Table
Table 2-1 Contents of SSA
Item
SSA chassis
Rail kit, which includes right and left rails, rail extensions (installed on the rails), mounting brackets (2), 2-56
screws (2), 10-32 screws (2), and 10-32 cage nuts (2)
RJ45 management cable
RJ45-to-DB9 converter
Anti-static wrist strap
Adhesive rubber feet (4)
Installation Guide
Release Notes
4.
Inspect the SSA for any signs of physical damage.
If there are any signs of damage, DO NOT install the SSA; instead, contact Enterasys
Networks. Refer to "Getting Help" on page xvii for details.
2-2 Installation
2‐1.