Attaching The Rails To A Four-Post Rack - Enterasys SSA-T1068-0652 Hardware Installation Manual

3. Attach each rail to the rack posts with two screws in the front and two screws in the back in
the top and bottom screw holes. See Figure
The SSA rail kit does not include screws for attaching the rails to the rack posts.
Figure 2-1

Attaching the Rails to a Four-post Rack

4. If necessary, tighten the screws that secure the rail extensions to the rails.
These screws must be tight before you place the SSA in the rails.
5. From the front of the rack, slide the SSA onto the rails until the mounting ears of the SSA are
against the front posts of the rack.
2‐1.
Enterasys S-Series Stand Alone (SSA) Hardware Installation Guide 2-5
Mounting the SSA