SSA-T1068-0652
SSA-T1068-0652
The SSA‐T1068‐0652 has forty‐eight 10/100/1000BASE‐T RJ45 ports and four 10GBASE‐X SFP+
ports, as shown in Figure
Figure 1-2
1
10/100/1000BASE-T RJ45 ports
2
10GBASE-X SFP+ ports
3
PoE mode button
4
System LEDs
Each of the 10/100/1000BASE‐T ports, which support PoE (IEEE 802.3af and 802.3at), can operate
in either half‐duplex or full‐duplex mode which can be determined by either auto‐negotiation or
manual configuration. The SSA‐T1068‐0652 can provide PoE power for powered devices on all 48
RJ45 ports simultaneously.
The SFP+ ports support a number of SFP+ pluggable transceivers. For more information about the
transceivers, see the following:
http://www.enterasys.com/products/transceivers‐ds.pdf
SSA-G1018-0652
The SSA‐G1018‐0652 has forty‐eight 1000BASE‐T SFP ports and four 10GBASE‐X SFP+ ports, as
shown in Figure
Figure 1-3
1
1000BASE-T SFP ports
2
10GBASE-X SFP+ ports
3
System LEDs
Each of the 1000BASE‐T ports can operate in either half‐duplex or full‐duplex mode which can be
determined by either auto‐negotiation or manual configuration.
The SFP and SFP+ ports support a number of SFP and SFP+ pluggable transceivers. For more
information about the transceivers, see the following:
http://www.enterasys.com/products/transceivers‐ds.pdf
1-2 Introduction
1‐2.
SSA-T1068-0652 Front Panel
1‐3.
SSA-G1018-0652 Front Panel
5
Micro-USB debug port
6
OFFLINE/RESTART button
7
COM port
4
Micro-USB debug port
5
OFFLINE/RESTART button
6
COM port