Securing The Ssa In A Four-Post Rack - Enterasys SSA-T1068-0652 Hardware Installation Manual

Mounting the SSA
6. Secure the front of the SSA to the rack by screwing the customer‐supplied rack screws in the
mounting ears on the right and left front of the SSA. See Figure
Figure 2-2
7. (Optional) Secure the rear of the SSA to the rails. See "Securing the SSA to the Rear of the
Rails" on page 2‐11.
You can now unpack and install the SSA power supplies. See "Unpacking the Power Supplies" on
page 2‐12 and "Installing the Power Supplies" on page 2‐13.
2-6 Installation

Securing the SSA in a Four-post Rack

2‐2.