Replacing Fans F1-F7; Removing The Side Panel Of The Ssa - Enterasys SSA-T1068-0652 Hardware Installation Manual

Replacing Fans F1–F7
To replace an F1–F7 fan:
1. Put on the ESD wrist strap and attach it to the ground receptacle on the front of the SSA.
2. Remove the side panel from the SSA by unscrewing the eight zinc (silver) screws from the
side panel. See Figure
Figure 3-5
3‐5.

Removing the Side Panel of the SSA

Enterasys S-Series Stand Alone (SSA) Hardware Installation Guide 3-9
Replacing the SSA Fans