9.
With the label side of the replacement fan facing into the SSA and the cable on the left, connect
the replacement fan to the chassis connector. See Figure
Figure 3-10
Connecting an F8–F10 Fan (Fan F8 Example)
1
Fan F8 connector
10.
Feed the excess fan cable into the cable management clip. See Figure
11. Position the cables of the F8–F10 fans on the floor of the SSA.
12. Position the F8–F10 fans on top of their cables.
13. Reinstall fan F7.
14. Reinstall the side panel of the SSA.
You can now reinstall the SSA in the equipment rack.
2
F8–F10 cable management clip
Enterasys S-Series Stand Alone (SSA) Hardware Installation Guide 3-13
Replacing the SSA Fans
3‐10.
3
Fan F8
3‐10.