Adjusting Light Output Settings; Setting Fade Time - Christie Mirage HD25 User Manual

• Show All Warnings—Shows all lens warnings.
• Hide Zoom Motor Warnings—Hides zoom motor warnings.
• Hide Detection Warnings—Hides lens detection warnings. Christie recommends
selecting this option when using a third-party lens.
3. Select Enter.

Adjusting light output settings

Optimize the projector's native color balance.
1. Select MENU > Admin > Service > Light Combiner Adjustment.
2. Enter the service password.
3. To adjust the projector brightness, select Light Output Power.
4. Set the Color Correction Mode to Max Drives before modifying any of the R/G/B adjustment
controls.
5. Use the slider to increase and decrease the projector brightness and select Enter.
6. To adjust the red color balance, select Red Adjustment.
7. Use the slider to increase and decrease the red color balance and select Enter.
8. To adjust the green color balance, select Green+Red Adjustment.
The red color balance is also affected because the spectrum of the green phosphor includes
some red light.
9. Use the slider to increase and decrease the green and red phosphor and select Enter.
10. To adjust the blue color balance, select Blue Adjustment.
11. Use the slider to increase and decrease the blue color balance and select Enter.
12. Refer to Adjusting primary colors (on page 26) and DMD color correction (on page 26)
after adjusting the light output settings.
R/G/B drive adjustments will affect the Color Primary Settings.
13. To configure different color balance settings depending on the Light Output Power setting,
use the Setting up projector profiles (on page 47) feature.

Setting fade time

Configure projector shuttering options.
1. Select MENU > Configuration > Light & Output Settings > Fade Time (S).
2. Use the slider to increase and decrease the timer and select Enter.
To shutter immediately, set the Fade Time to 0.00s.
Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25
020-102649-01 Rev. 1 (04-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Adjusting the image
25