Christie Mirage HD25 User Manual page 11

Crimson series
Hide thumbs Also See for Mirage HD25:
Table of Contents

Advertisement

Projection lens
6.9-10.4:1 HD ILS lens
For all other markets, hazard distances based upon IEC 62471-5:2015, Photobiological safety of lamps
and lamp systems – Part 5: Image projectors:
Projection lens
0.37:1 HD ILS lens
0.67:1 HD ILS lens
0.8-1.16 HD ILS lens
1.1:1 HD ILS lens
1.16-1.49:1 HD ILS lens
1.4-1.8:1 HD ILS lens
1.8-2.6:1 HD ILS lens
2.6-4.1:1 HD ILS lens
4.1-6.9:1 HD ILS lens
6.9-10.4:1 HD ILS lens
For Installations in the United States
The following must be in place for laser-illuminated projector installations in the United States:
Any human access to the hazard zone, if applicable, must be restricted by barriers to enforce
the no access zone.
Permanent show installations containing Risk Group 3 laser-illuminated projectors must meet
the following conditions:
Installed by Christie or by Christie-authorized and trained installers.
Refer to the Laser Illuminated Projector - Class 1 Risk Group 3 Installation training (Course
code: CF-LIPI-01) on the http://www.christieuniversity.com site.
Performed according to instructions provided by Christie.
Ensure the projection system is securely mounted or immobilized to prevent unintended
movement or misalignment of the projections.
Temporary show installations containing Risk Group 3 laser-illuminated projectors may be
installed by Christie or sold or leased only to valid laser light show variance holders (laser light
show manufacturers) for image projection applications. Such manufacturers may currently
hold a valid variance for production of Class IIIb and IV laser light shows and/or for
incorporation of the Risk Group 3 laser-illuminated projectors into their shows. This
requirement applies also to dealers and distributors of these laser-illuminated projectors.
The Christie Laser Projection System Installation Checklist must be fully completed after the
installation and sent to lasercompliance@christiedigital.com. A copy can remain on-site. This
checklist can be found as a separate document in the accessory box with the manual.
If installing in the US states of Arizona, Florida, Georgia, Illinois and Massachusetts, go to
www.christiedigital.com for additional regulatory requirements.
Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25
020-102649-01 Rev. 1 (04-2018)
Copyright
2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Part number
118-100116-XX
Part number
118-131106-XX
118-100110-XX
118-130105-XX
118-100117-XX
118-100111-XX
118-100112-XX
118-100113-XX
118-100114-XX
118-100115-XX
118-100116-XX
Introduction
Hazard distance
(m)
18.6
Hazard distance
(m)
1.0
1.0
1.0
1.0
1.0
1.1
1.8
2.3
6.3
12.6
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Crimson hd25Mirage wu25Crimson wu25

Table of Contents