8.3 Burner/Perimeter Media Installation
WARNING: DO NOT BLOCK PILOT WITH MEDIA. A BLOCKED PILOT MAY
CAUSE DELAYED IGNITION.
8.3.1 Burner Media Kits (#903-LAV,
#304-COP, #304-BLK)
1.
Install an even layer of your chosen media across the whole
burner. See figure below.
2.
Save any unused media for later use.
8.3.2 Perimeter Media Kits (#904-LAV, #307-COP,
#307-BLK, #105-VERM, #104-SAND-B)
3.
Install an even layer of media across the front and rear perimeter.
See figure below.
4.
Save any unused media for later use.
BURNER MEDIA INSTALLATION - INSTALL AN EVEN LAYER ACROSS THE WHOLE BURNER
PERIMETER MEDIA INSTALLATION - INSTALL AN EVEN LAYER ACROSS THE FRONT AND REAR PERIMETER
Figure 8.3, Media Installation
30 FIREPLACE SETUP
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
#CLW-50 R.1 March 2018