Fireplace Setup; Barrier Installation; Glass Frame Assembly - kozy heat CALLAWAY 50 Installation And Operation Manual

Direct vent gas fireplace
Hide thumbs Also See for CALLAWAY 50:
Table of Contents

Advertisement

8.0 FIREPLACE SETUP

8.1 Barrier Installation

8.1.1 Safety Barrier Screen (#CW50-ES)
1.
Locate the (2) slots located on each side of the fireplace metal
cabinet.
2.
Align the notched tabs located on the back of the safety screen
with the slots on the fireplace frame.
3.
Raise the safety screen front slightly into slots and allow the tabs
to lower into position.
To remove safety screen: lift the screen up and out of slots.
SAFETY BARRIER SCREEN
#CW50-ES
Figure 8.1, Safety Screen Installation
8.1.2 Optional Surrounds (CW50-RS,
CW50-RS4, CW50-GS, CW50-FS)
1.
Remove the safety barrier.
2.
Locate the (2) mounting nuts on each side of the fireplace metal
cabinet.
3.
Align the mounting holes on the shroud to the corresponding
mounting nuts.
4.
Secure with (4) truss head screws (provided).
5.
Reinstall safety barrier.
MOUTNING
NUTS
Figure 8.2, Surround Installation
#CLW-50 R.1 March 2018

8.2 Glass Frame Assembly

WARNING: Do not operate this fireplace with the glass removed,
cracked, or broken. Replacement of the glass assembly should be done
by a licensed or qualified service person.
8.2.1 Remove Glass Frame Assembly
WARNING: Do not remove the glass assembly when hot.
1.
Remove the safety barrier.
2.
Remove the gas valve access cover by lifting up out of slots.
3.
Locate (2) spring-loaded latches securing the glass assembly at
the bottom of the firebox.
4.
Pull the spring-loaded latches out and down to release the
bottom of the glass assembly.
5.
Lift glass assembly up and off of the (2) tabs located at the top of
the firebox.
8.2.2 Install Glass Frame Assembly
1.
Align the slots on top of the glass assembly over the tabs at
the top of the firebox while lowering the bottom of the glass
assembly into position.
2.
Pull the spring-loaded latches out and up to secure the bottom
of glass to the bottom of the fireplace.
3.
Reinstall valve access cover by setting down into slots.
4.
Reinstall safety barrier.
(2) TRUSS HEAD
SCREWS -
LEFT SIDE
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
FIREPLACE SETUP 29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clw-50

Table of Contents