Access To Special Modes - Fagor Innova 20i-M Installation And Operation Manual

[-18.24]
[-10.00]
X 0.000 Y 0.000
[-43.340]
[-0.000]
X 0.000 Y 0.000

2.7 Access to special modes

Function number
(14/40) - DRO operation - Installation/Operation - 20i-M / 30i-M - V0703
- Go into incremental. ABS LED OFF.
- Preset the part zero or datum point (see section "Datum point (part zero) to
work with tool compensation" page 10)
Go to point A. For that:
- Press these keystroke sequences.
- Compensate for the tool.
- Move both axes until the displays read X 0.000 and Y 0.000.
Go to point B. For that:
- Press these keystroke sequences.
- Compensate for the tool.
- Move X axis until the displays read X 0.000 and Y 0.000.
And so on for the remaining points of the figure using the icon keys shown.
Pressing [F] accesses the "special functions" menu.
Pressing this key repeatedly displays the various available options.
Pressing [ENTER] assumes the selected option.
A function may be directly accessed by pressing [F] and then the function
number:
1= bolt-hole drilling, 2 = linear drilling, 3 = hold, 4 = calculator,
5 = part angle, 6 = corner rounding.
For example:
[F] [1] to access BOLT-HOLE DRILLING.
[F] [4] to directly access the CALCULATOR mode.