Outside Pocket - Fagor Innova 20i-M Installation And Operation Manual

[-30.56]
[-10.00]
X 0.000 Y 0.000
[-60.25]
[-0.000]
X 0.000 Y 0.000
2.6.2

Outside pocket

- Go into incremental. ABS LED OFF.
- Preset the part zero or datum point (see section "Datum point (part zero) to
work with tool compensation" page 10)
Go to point A. For that:
- Press these keystroke sequences.
- Compensate for the tool.
- Move both axes until the displays read X 0.000 and Y 0.000.
Go to point B. For that:
- Press these keystroke sequences.
- Compensate for the tool.
- Move X axis until the displays read X 0.000 and Y 0.000.
And so on for the remaining points of the figure using the icon keys shown.
V0703 - 20i-M / 30i-M - Installation/Operation - DRO operation - (13/40)
A
B