Calculator Function; Simulation / Execution Special Modes; Cycle Simulation - Fagor Innova 40i P-B Installation & Operation Manual

2.5.3

Calculator function

Function Calculator
It may be used to carry out mathematical and trigonometric
operations as well as preset the desired axis with the result of
the calculation or import the displayed coordinate values into
the calculator to carry out math operations.
Different types of calculators may be selected at the function
bar: Arithmetic, trigonometric and for square functions.
Numeric
Numeric calculator. Functions:
Trigonometric calculator. Functions: Sin, Cos, Tan.
Trigonom
Functions:
Square
To Exit the calculator Set an axis with the result or Insert a value into the calculator.
Function
Exit
Set
pressing the Calc button of the function bar on the Preset screen.
Insert
2.5.4

Simulation / execution special modes:

After completing the data that define a drilling cycle, you can execute the cycle or simulate it to verify that
data entered is correct.
2.5.4.1

Cycle simulation:

Function Bolt-hole drilling
Linear drilling
Grid pattern drilling
The simulation may be seen in the following modes: tool
movement, views and sections or 3D.
View Tool movement
+ - x /
Exit the calculator.
Set one of the axis with the result of the calculator. To do this, access the calculator by
Enter the value of an axis, PI or 2PI into the calculator.
Function Show Graph
Tool movement
40i P - Installation/Operation - DRO operation - (14/32)