2.5.6
Simulation / execution special modes
After completing the data that define a drilling cycle, you can execute the cycle or simulate it to verify that
data entered is correct.
2.5.6.1
Cycle simulation
Function
Bolt-hole drilling
Linear drilling
Grid pattern drilling
The simulation may be seen in the following modes: tool
movement, views and sections or 3D.
View
Tool movement
View
Engineering Drawing
Consists of a top view and two sections with a mobile partition
by pressing the arrow keys.
View
3D
The 3D graphic may be rotated using the arrow keys.
Opens the window for entering the actual (real) part
Size
dimensions. Viewing the simulation in real mode requires
entering the real X, Y, Z dimensions of the part.
Function Show Graph
40i - Installation/Operation - DRO operation - (13/40)
Tool movement
2D views
3D solid