Fagor Innova 20i-M Installation And Operation Manual page 37

It is recommended to mount the DRO vertically,
Safety symbols
Symbols that may be carried on the product
so its power switch of the back panel is at a distance between 0.7 m (27.5
inches) and 1.7 m (5.6 ft) off the floor and away from coolants, chemical
products, blows etc that could damage it. Keep it away from direct sunlight,
extremely hot air, high voltage and high current sources as well as from
relays, or high electromagnetic fields (about 0.5 m or 20 inches).
This unit complies with the European directives on electromagnetic
compatibility. Nevertheless, it is recommended to keep it away from sources
of electromagnetic disturbance such as.
- Powerful loads connected to the same AC power line as this equipment.
- Nearby portable transmitters (Radio-telephones, Ham radio transmitters).
- Nearby radio / TC transmitters.
- Nearby arc welding machines.
- Nearby High Voltage power lines.
- Disturbance generating elements of the machine.
- Etc.
Symbols which may appear on the manual
WARNING symbol.
It has an associated text indicating those actions or operations may hurt
people or damage products.
WARNING symbol.
It has an associated text indicating those actions or operations may hurt
people or damage products.
"Electrical shock" symbol.
It indicates that point may be under electrical voltage.
"Ground Protection" symbol.
It indicates that point must be connected to the main ground point of the
machine as protection for people and units.
V0703 - 20i-M / 30i-M - Installation/Operation - Appendix - (37/40)