Operating Modes; How To Access To The Operating Modes - Fagor CNC 8070 Operating Manual

Operating manual
2.2
2.2.1
2.
CNC 8070
(S V03.0 )
OFT X
16

Operating modes

How to access to the operating modes

The CNC operating modes may be accessed from the keyboard or from the task
window that is displayed with the key combination [CTRL]+[A].
Each operating mode may consist of several screens or pages. Switching between
the different screens is done by pressing the access key for that operating mode.
Every time it is pressed, it displays the next screen. The screen selection is rotary
in such a way that when pressing this key on the last screen, it shows the first one.
Accessing the operating modes from the keyboard
The following operating modes may be accessed from the keyboard.
Automatic mode.
Jog mode.
MDI mode.
Editing - simulation mode.
User tables.
Tool and magazine table.
Utilities mode.
Also, the keyboard has a special key that may be configured by the machine
manufacturer to access their specific operating modes.
• Machine parameters.
• PLC.
• Diagnosis mode.
• Setup assistance.