Corner Rounding - Fagor Innova 20i-M Installation And Operation Manual

2.7.5

Corner rounding

Requested data:
This features guides the user in the corner rounding process in the selected
plane.
The DRO guides the machining running several passes until obtaining the
desired part. The number of passes depends on the tool radius being used.
The smaller the tool diameter, the more passes will be required for a better
part finish.
Go into corner rounding mode
Starting position: The current position is assumed as the starting point for
the machining operation.
Tool dimensions: If no tool has been defined, diameter = 0, it will request a
diameter value.
Work plane and final position: select the axes that define the desired plane
XY, YZ or XZ and enter the final position.
Note: The value of the final position must be incremental or absolute
according to the selected work mode, incremental (ABS led off) or absolute
(ABS led on).
Rounding radius: enter the rounding radius. A negative value(r-) means
concave and a positive value )r+) convex.
Quadrant: Trigonometric quadrant number.
2
3
V0703 - 20i-M / 30i-M - Installation/Operation - DRO operation - (21/40)
r -
r +
1
4