Allocating Wash Blocks - Miele PG 8593 Operating Instructions Manual

Allocating wash
blocks
For every program change the wash blocks must first be allocated.
Universal
Accept
Allocation is by multiple choice. A box is shown next to all wash
blocks in the display. If a wash block is allocated to the program,
there is a tick  in the box. This wash block is allocated to the
program by ticking the box or the allocation can be removed by
removing the tick.
The wash blocks can be selected or deselected using the  and 

arrow buttons and confirming with OK.
To save the selection, select the

and confirm with OK.
If you want to adopt the preset wash blocks without any changes,

you can confirm the
The further setting options will then follow. You can edit these in any
order you want.
Pre-wash 1
Accept
Accept option immediately with OK.
Program settings
option at the end of the list
97