Resetting the
operating hours
counter for the
HEPA filter
The maximum permissible number of operating hours is pre-set in the
controls for all filters. After a filter has been changed the operating
hours counter must be reset.
Open the menu as follows:
Button
Settings
Filter change
HEPA filter
Filter life remaining
55 h
The remaining operating hours for this filter type is shown in the
display.
Confirm the message with OK.
Then you will be asked if you wish to reset the operating hours
counter.
The operating hours counter must only be reset when the filter
has been changed.
Reset counter
No
Yes
No
–
The counter will not be reset.
Yes
–
The operating hours counter will be reset for the new filter.
Select an option using the and arrow buttons.
Confirm your selection with OK.
Maintenance
129