Program
cancelled due to a
fault
Cancelling a
program manually
Restarting the
program
Cancelling a program
If a program is cancelled, the items in the machine must be
reprocessed again.
Be careful when opening the door.
The wash load could be hot. Danger of scalding, burning and
chemical burns.
The program stops and an error message appears in the display.
Take appropriate steps to resolve the fault, depending on its cause
(see "Problem solving guide").
A program which is already running should only be cancelled if strictly
necessary, e.g. if the wash load is moving about significantly.
Press and hold the Start/Stop button until the display changes to
the following view:
Program cancellation
No
Yes
Yes
using the and arrow buttons.
Select
The program is cancelled when the OK button is pressed. Entry of a
PIN code may also be required (see "Further settings / Code")
If no button is pressed for several seconds, or if the process is
cancelled using the button, the display will revert to the program
sequence display.
Start the program again or select a new program.
Operation
59