Maintenance
54
Cleaning the control panel
Clean the control panel and the glass door with a damp cloth or
with a suitable cleaner for glass or plastic.
For disinfection purposes low and intermediate chemical
disinfectants may be used.
Do not use abrasive cleaners or all-purpose cleaners.
Because of their chemical composition they could cause serious
damage to the plastic surface.
Cleaning the front of the washer-disinfector
To clean the stainless steel front, use a damp cloth with a solution
of washing-up liquid and hot water, or with a non-abrasive cleaning
agent for use on stainless steel.
To help prevent re-soiling (fingerprints, etc.), a suitable stainless
steel conditioner can be used after cleaning.
Do not use ammonium-based cleaners or thinners!
They can damage the surface material.
Do not hose down the washer-disinfector or the immediate
vicinity, e.g. with a water hose or pressure washer.
Cleaning the wash cabinet
The wash cabinet is mostly self-cleaning.
If you notice a build-up of deposits, please contact Miele Service
for advice.
Cleaning the door seal
The door seals should be cleaned regularly with a damp cloth to
remove any soiling.
Useful tip: Damaged or leaky door seals should be replaced by Miele
Service.