Checking
consumption
Refill indicator
Dispensing
neutralizing agent
Adding and dispensing process chemicals
Check consumption regularly by checking the fill levels in the supply
containers and replace containers in good time to avoid the
dispensing system being sucked completely dry.
When the fill level is low in the
agent you are reminded to refill it.
Refill DOS
Confirm the message shown with OK and
Refill the neutralising agent as described.
If it has run out, the machine will be locked for further use.
It will be ready for use again when the supply container has been
replaced.
For adjusting dispensing concentration, see "Further settings /
Dispensing systems".
DOS 3
supply container for neutralizing
51