Program settings
Setting the
temperature and
time
Setting the
Temperature 1
Set Drying time 1
110
The drying phase is divided into two blocks. The temperature and
holding time (Drying time) must be set for each block.
The first block (Temperature 1 and Drying time 1) is not allocated to
all programs but can be set up by Miele Service if required.
...
Temperature 1
Temperature is adjusted in 5 °C increments. The possible range is
shown in the bottom line.
Use the arrow buttons (higher) and (lower) to set the
temperature.
Press OK to save the setting.
...
Drying time 1
Holding time is adjusted in 1 minute increments. The possible range
is shown in the bottom line.
Use the arrow buttons (higher) and (lower) to set the holding
time.
Press OK to save the setting.
Temperature 1
75
°C
(50 - 115
°C)
Drying time 1
30
Min
(0 - 120
Min)