Miele PG 8593 Operating Instructions Manual page 108

Program settings
Setting the
holding time
108
The holding time is the duration in which the wash block temperature
is kept constant.
...
Holding time

The duration can be set in 1 minute increments. The possible range is
shown in the bottom line.
If process chemicals are to be dispensed in this wash block, the
holding time will equal at least to the dispensing (DOS) contact time.
It is not possible to set a lower value.
Use the arrow buttons  (higher) and  (lower) to set the holding

time.
Press OK to save the setting.

Holding time
1 Min
Min )
(0 - 15