Printer / Serial Interface - Miele PG 8593 Operating Instructions Manual

Problem solving guide

Printer / Serial interface

Problem
Serial printer fault: no paper
Serial printer fault: offline
Serial printer fault: general
fault
Network down
144
Possible cause and remedy
The printer has run out of paper.
Replenish the paper.

The machine cannot connect to the printer.
Switch the printer on.

Check the connection between the machine and the

printer.
If in doubt, have the configuration of the interface

checked by a suitably qualified person.
If the printer has been replaced, the printer type must be
adjusted in the interface configuration.
The printer is not ready for operation.
Check the printer for fault messages.

Change the printer cartridge if necessary.

The communication module has identified a network
interruption or cannot establish a connection.
Consult your network administrator.

If the problem cannot be resolved:
Contact the Miele Service Department.
