Warning And Safety Instructions - Miele PG 8593 Operating Instructions Manual

Warning and Safety Instructions

14
This machine complies with all statutory safety requirements.
Inappropriate use can, however, lead to personal injury and
material damage.
Read these instructions carefully before using it for the first time to
avoid the risk of accidents and damage to the machine.
Keep these instructions in a safe place and make sure they are
available at all times to any user of the machine.
Correct application

This machine is designed for use with the applications described in
these operating instructions only. Alterations or conversions to the
machine, or using it for purposes other than those for which it was
designed, are not permitted and could be dangerous.
This machine must only be used for cleaning laboratory glassware
and utensils if the manufacturer has stated that they are suitable for
machine reprocessing. Manufacturer's cleaning and maintenance
instructions must also be observed.
Miele cannot be held liable for damage caused by improper or
incorrect use or operation of the machine.

This machine is intended for indoor use in a stationary location
only.
Risk of injury
Please pay attention to the following notes to avoid injury!

This machine must be commissioned, serviced and repaired by a
Miele service technician only. To ensure compliance with Good
Laboratory Practice guidelines, a Miele service contract is
recommended. Unauthorized repairs can pose considerable risks to
the user.

Do not install the machine in an area where there is any risk of
explosion or of freezing conditions.

In order to reduce the risk of water damage, the area around the
machine should be limited to furniture and fittings that are designed
for use in commercial environments.

If the machine is built under, it must only be installed under a
continuous worktop run which is firmly secured to adjacent units to
improve stability.

The electrical safety of this machine can only be guaranteed when
it is correctly grounded. It is essential that this standard safety
requirement is met. If in any doubt, please have the electrical
installation tested by a qualified electrician. Miele cannot be held
liable for the consequences of an inadequate earthing system (e.g.
electric shock).