Insufficient Salt / Water Softener - Miele PG 8593 Operating Instructions Manual

Insufficient salt / Water softener

Problem
Refill salt
Machine locking soon
Insufficient salt
Salt container empty,
Program locked
Salt container lid not closed
correctly
Possible cause and remedy
Salt is running low in the water softener.
Refill the reactivation salt before starting the next

program.
Salt in the water softener is completely used up and
reactivation is no longer possible. The machine is locked for
further use.
Refill with reactivation salt.

The water softener cannot reactivate because there is
insufficient salt. The machine is locked for further use.
Refill with reactivation salt.

The lock is lifted a couple of seconds after refilling the salt
reservoir. Reactivation will occur automatically during the
next program sequence.
The salt container is not closed properly.
Close the container properly.

Salt residues are preventing it from closing.
Clean any excess salt from funnel, the lid and the seal.

Do not use running water as this can cause the salt
reservoir to overflow.
Close the container properly.

Problem solving guide
133