Important Safety Instructions - Miele PG 8583 Operating Instructions Manual

IMPORTANT SAFETY INSTRUCTIONS

8
This machine complies with all statutory safety requirements.
However, inappropriate use can lead to personal injury and material
damage.
Read these instructions carefully before using the machine for the
first time to avoid the risk of accidents and damage to the machine.
Keep these instructions in a safe place where they are accessible
to users at all times.
Proper use

This machine is designed for use with the applications described in
these operating instructions only. Alterations or conversions to the
machine, or using it for purposes other than those for which it was
designed, are not permitted and could be dangerous.
This machine must only be used for cleaning laboratory glassware
and utensils if the manufacturer has stated that they are suitable for
machine reprocessing. Manufacturer's cleaning and maintenance
instructions must also be observed.
Miele cannot be held liable for damage caused by improper or
incorrect use or operation of the machine.

This machine is intended for indoor use in a stationary location
only.
Risk of injury
Please pay attention to the following notes to avoid injury.

This machine must be commissioned, serviced and repaired by a
Miele authorized and trained service technician only. To ensure
compliance with Good Laboratory Practice guidelines, Miele repair
and maintenance contracts are recommended. Unauthorized repairs
can pose considerable risks to the user.

Do not install the machine in an area where there is any risk of
explosion or of freezing conditions.

In order to reduce the risk of water damage, the area around the
machine should be limited to furniture and fittings that are designed
for use in commercial environments.

Some metal parts pose a risk of injury/being cut. Wear cut-
resistant protective gloves when transporting and setting up the
machine.

If the machine is built under a worktop, it must only be installed
under a continuous worktop run which is firmly secured to adjacent
units to improve stability.