Com Port Setup; Searching For Card; Authorization Code Window; Upgrade Process Complete - Novatel AG-Star User Manual

NovAtel Firmware and Software
5.3.2.3 Downloading Firmware
1. Select the file to download according to Section 5.3.2.1, Open a File to Download on page 38.
2. Ensure the file path and name are displayed in main display area (see Figure 22, Open File in WinLoad
on page 38).
3. Click Write Flash to download the firmware.
4. When Searching for card appears in the main display, power cycle the receiver.
5. If the Authorization Code window appears, enter the auth-code and click OK. See Section 5.2,
Authorization Code on page 36 for further information about the Authorization Code.
6. The receiver finishes the download and then resets. The process is complete when Done appears in the
main display area.
7. Close WinLoad.
AG-Star User Manual Rev 4
Figure 23: COM Port Setup
Figure 24: Searching for Card
Figure 25: Authorization Code Window
Figure 26: Upgrade Process Complete
Chapter 5
39