Novatel AG-Star User Manual page 52

Field Field Type ASCII Value
1 COM -
header
2 port 1
2
6
8
3 bps/baud 300, 600, 900, 1200, 2400,
4800, 9600, 19200, 38400,
57600, 115200, or 230400
4 parity 0
1
2
5 databits 7 or 8
6 stopbits 1 or 2
7 handshake 0
1
2
8 echo OFF
ON
9 break OFF
ON
a. Although the standard command for the receiver card within the AG-Star accepts the CTS option for hardware
handshaking, the physical lines for hardware flow control are not available on the AG-Star connector.
AG-Star User Manual Rev 4
Binary
Value
- This field contains the command
name or the message header
depending on whether the command
is abbreviated ASCII, ASCII or binary.
COM1 Select COM port 1 to configure
COM2 Select COM port 2 to configure
THISPORT Select the current COM port (default)
ALL Select all COM ports
Communication baud rate (bps).
N No parity (default)
E Even parity
O Odd parity
Number of data bits
(default = 8)
Number of stop bits
(default = 1)
N No handshaking (default)
XON XON/XOFF software handshaking
CTS
CTS/RTS hardware handshaking
0 No echo (default)
1 Transmit any input characters as they
are received
0 Disable break detection
1 Enable break detection (default)
Description
a
Binary Binary Binary
Format Bytes Offset
- H 0
Enum 4 H
ULong 4 H+4
Enum 4 H+8
ULong 4 H+12
ULong 4 H+16
Enum 4 H+20
Enum 4 H+24
Enum 4 H+28
52