Table of Contents
Advertisement
Introduction
1.2
Scope
This manual contains information about the installation and operation of the AG-Star system. It is beyond the
scope of this manual to provide details on service or repair. Contact your local NovAtel dealer for any
customer-service related inquiries.
An AG-Star system requires the addition of accessories and a power supply.
The AG-Star utilizes a comprehensive user-interface command structure, which requires communications
through its communications ports. This manual describes the AG-Star specific commands and logs, see
Appendix B, Commands on page 50 and Appendix C, Logs on page 61. For descriptions of other commands
and logs available for AG-Star, refer to the
web site (www.novatel.com/support/manuals/). It is recommended that these documents be kept together for
easy reference.
AG-Star output is compatible with post-processing software from NovAtel's Waypoint
our web site at
www.novatel.com
1.3
Conventions
The following conventions are used in this manual:
Information that supplements or clarifies text.
A caution that actions, operation or configuration may lead to incorrect or improper use of the
hardware.
A warning that actions, operation or configuration may result in regulatory noncompliance,
safety issues or equipment damage.
•
The letter H in the Offset columns of the commands and logs tables represents the header length for
that command or log. Refer to the
header details.
•
The number following 0x is a hexadecimal number.
•
Command descriptions' brackets, [ ], indicate optional parameters.
•
In tables where values are missing they are assumed to be reserved for future use.
•
Status words are output as hexadecimal numbers and must be converted to binary format (and in
some cases then also to decimal). For an example of this type of conversion, refer to the RANGE log
in the
OEMStar Firmware Reference
•
Conversions and their binary or decimal results are always read from right to left. For a complete list
of hexadecimal, binary and decimal equivalents, search our support materials for
on the NovAtel web site.
See also Syntax Conventions on page 50 for more syntax when entering commands.
AG-Star User Manual Rev 4
OEMStar Firmware Reference Manual
for details.
OEMStar Firmware Reference Manual
Manual.
Chapter 1
available from the NovAtel
®
Products Group. Visit
for ASCII and binary
Unit Conversions
12
Advertisement
Table of Contents
